Akbaepoor, Eiman
Investigation on the Application of the Organic Complex " Sulvy-x " in Peroxide Bleaching of Hornbeam CMP Pulp [Volume 26, Issue 1, 2011, Pages 117-127]
Akbarpoor, Eiman
Optical and physical properties of mixed hardwood CMP pulp and the birch wood [Volume 26, Issue 3, 2011, Pages 523-534]
Akbarpoor, Eiman
Biometrical properties of hornbeam fibers
from Astara [Volume 26, Issue 3, 2011, Pages 535-544]
Akbarpoor, Iman
Investigation on the physical and mechanical properties of waste newspaper deinked pulp by cellulase enzyme compared to conventional method [Volume 26, Issue 2, 2011, Pages 243-255]
Akbarpoor, Iman
Investigation of Substituting the organic complex of sulvy-x rather than sodium silicate in CMP pulp bleaching of Mazandaran wood and paper industries [Volume 26, Issue 3, 2011, Pages 411-428]
Akbarpour, Iman
Utilization of Organic Complex of Glanapone Stab Rather than Sodium Silicate in Peroxide Bleaching of Mixed Hardwood CMP Pulp [Volume 26, Issue 1, 2011, Pages 193-217]
Aliabadi, Meisam
Investigation on the Application of the Organic Complex " Sulvy-x " in Peroxide Bleaching of Hornbeam CMP Pulp [Volume 26, Issue 1, 2011, Pages 117-127]
Aliabadi, Meisam
Biometrical properties of hornbeam fibers
from Astara [Volume 26, Issue 3, 2011, Pages 535-544]
Arabi, Mohammad
Prediction mechanical properties of particleboard and analysis the interaction effect of slenderness ratio and resin content, using linear, quadratic and exponential equation [Volume 26, Issue 3, 2011, Pages 511-522]
Asdolah zadeh, Mohammad taghi
The effects of hot water pre-extraction and alkaline catalyzed on
soda-AQ pulping of kenaf whole stem [Volume 26, Issue 3, 2011, Pages 437-453]
Ashori, Alireza
Chemical composition of the paper making solid wastes [Volume 26, Issue 2, 2011, Pages 281-290]
Azadfalah, Mohammad
Evaluation of steam pretreatment of poplar wood particles on the mechanical and physical properties of particleboard [Volume 26, Issue 4, 2012, Pages 785-797]
Azadfallah, Mohammad
Effect of steam treatment on chemical changes of wood components [Volume 26, Issue 4, 2012, Pages 682-698]
Azad far, Mohammad ali
The Influence of Alkalinity in Oxygen Delignification of Soda/AQ Pulp From
Old Corrugated Container [Volume 26, Issue 2, 2011, Pages 232-242]
Azimi dalrstani, Ali
Effect of Beech bark Content on Physical and Mechanical Properties
of Bark Flour-Polypropylene Composites [Volume 26, Issue 4, 2012, Pages 811-823]
B
BARAZANDEH, MOHAMMAD MAHDI
Evaluating Rate Equations of Delignification Reaction of Bagasse in Soda Pulping [Volume 26, Issue 1, 2011, Pages 72-82]
Bazyar, Behzad
Investigation of applying the old corrugated container (OCC)
and aspen chips in particleboard production [Volume 26, Issue 1, 2011, Pages 138-150]
Bazyar, Behzad
Thermal properties and X-ray diffraction of wood plastic nanocomposite (effect of coupling agent and nanoclay content) [Volume 26, Issue 1, 2011, Pages 151-160]
Bazyar, Behzad
Effect of Enzymatic Treatment on Mechanical Strength of Deinked Pulp of Old Newspaper [Volume 26, Issue 1, 2011, Pages 161-172]
Behroz, Rabi
Use of kraft lignin as compatibilizer in wood flour-polypropylene
Composites [Volume 26, Issue 3, 2011, Pages 454-465]
Behroz, Rabi
Effect of anthraquinone on NSSC pupling of P.deltoides [Volume 26, Issue 4, 2012, Pages 622-633]
Behroz, Rabi
Creep behavior of the composites made from creep behavior of the composites made from waste materials of OCC recycling mills [Volume 26, Issue 4, 2012, Pages 798-810]
Behroz, Rabie
The Influence of Alkalinity in Oxygen Delignification of Soda/AQ Pulp From
Old Corrugated Container [Volume 26, Issue 2, 2011, Pages 232-242]
Behroz, Rabie
The effect of consistency on the optical properties of hydrogen peroxide bleached CMP pulp [Volume 26, Issue 2, 2011, Pages 298-409]
Brazandeh, Mohammad mehdi
Pulp and paper making features of Sequoia sempervirens wood [Volume 26, Issue 1, 2011, Pages 83-97]
Byat kashkoli, Ali
Determination of proper college student chair dimension and comparison with the prevalent model [Volume 26, Issue 4, 2012, Pages 772-784]
D
Dashti, Hadi
The susceptibility of poplar tension and normal wood (P. nigra) to collapse during drying [Volume 26, Issue 3, 2011, Pages 579-591]
Dehghani, Mohammad reza
Study of initial alkali charge effects on properties of soda beech pulp by regression models [Volume 26, Issue 2, 2011, Pages 219-231]
Dos hosseini, Kazem
The effect of paper sludge , content and polymer types on the physical properties of wood- plastic composites [Volume 26, Issue 3, 2011, Pages 486-494]
Dosthosseini, Kazem
Utilization of date palm and kenaf fibers for reinforcement of
practical properties of plywood [Volume 26, Issue 3, 2011, Pages 495-510]
Dosthosseini, Kazem
Evaluation of steam pretreatment of poplar wood particles on the mechanical and physical properties of particleboard [Volume 26, Issue 4, 2012, Pages 785-797]
Dost hosseini, Kazem
Utilization of waste paper and old corrugated carton (OCC) as a filler of urea formaldehyde resin on plywood manufacturing [Volume 26, Issue 2, 2011, Pages 271-280]
Dost hosseini, Kazem
Chemical composition of the paper making solid wastes [Volume 26, Issue 2, 2011, Pages 281-290]
Dost hosseini, Kazem
Investigating of the effect of using bagasse and isocyanate adhesive on the 3-layer particleboard manufacturing [Volume 26, Issue 2, 2011, Pages 300-313]
Dost hosseini, Kazem
Effect of steam treatment on chemical changes of wood components [Volume 26, Issue 4, 2012, Pages 682-698]
Dost Hosseini, Kazem
Investigation on the effect of acetylation and the resin type on the biological resistance of aspen tree layered particleboard [Volume 26, Issue 3, 2011, Pages 466-476]
E
Ebrahim poor tasmani, Jafar
Investigation of newsprint pulp strength of prepared from rape straw using chemo mechanical pulping process [Volume 26, Issue 3, 2011, Pages 429-436]
Efhami, Davod
Study of initial alkali charge effects on properties of soda beech pulp by regression models [Volume 26, Issue 2, 2011, Pages 219-231]
Enayati, Aliakbar
Evaluation of steam pretreatment of poplar wood particles on the mechanical and physical properties of particleboard [Volume 26, Issue 4, 2012, Pages 785-797]
Enayati, Ali akbar
Prediction mechanical properties of particleboard and analysis the interaction effect of slenderness ratio and resin content, using linear, quadratic and exponential equation [Volume 26, Issue 3, 2011, Pages 511-522]
Enayati, Ali akbar
Effect of steam treatment on chemical changes of wood components [Volume 26, Issue 4, 2012, Pages 682-698]
Enayati, Ali akbar
Effect of great size wood particles on density profile and physical -mechanical properties of particleboards made from poplar [Volume 26, Issue 4, 2012, Pages 719-731]
Enayati, Ali akbar
Effect of different polypropylene grades and coupling agent on the properties of Wood Plastic Composites [Volume 26, Issue 4, 2012, Pages 757-784]
Eshaghi, Saeid
Comparison of the quality of poplar lumber in the upper, middle and lower rows of wood drying kiln [Volume 26, Issue 2, 2011, Pages 326-338]
Eshaghi, Saeid
The susceptibility of poplar tension and normal wood (P. nigra) to collapse during drying [Volume 26, Issue 3, 2011, Pages 579-591]
Eshraghi, Amir
Investigation of applying the old corrugated container (OCC)
and aspen chips in particleboard production [Volume 26, Issue 1, 2011, Pages 138-150]
Eskandari, Jafar
Designing and manufacturing of polyester composites reinforced with natural and synthetic fibers as an alternative for the wood in music instruments [Volume 26, Issue 4, 2012, Pages 732-756]
Eslah, Farnaz
Effect of great size wood particles on density profile and physical -mechanical properties of particleboards made from poplar [Volume 26, Issue 4, 2012, Pages 719-731]
F
Faezipoor, Mohammad mehdi
Comparison of the quality of poplar lumber in the upper, middle and lower rows of wood drying kiln [Volume 26, Issue 2, 2011, Pages 326-338]
Faezipoor, Mohammad mehdi
Prediction mechanical properties of particleboard and analysis the interaction effect of slenderness ratio and resin content, using linear, quadratic and exponential equation [Volume 26, Issue 3, 2011, Pages 511-522]
Faezipoor, Mohammad mehdi
Effect of nanoclay on the properties of medium density
fiberboard (MDF) [Volume 26, Issue 4, 2012, Pages 699-707]
Fakhryan, Abas
Pulp and paper making features of Sequoia sempervirens wood [Volume 26, Issue 1, 2011, Pages 83-97]
Fakhryan roghani, Abbas
Evaluating Rate Equations of Delignification Reaction of Bagasse in Soda Pulping [Volume 26, Issue 1, 2011, Pages 72-82]
Farnod, Ramin
The impact of chemical treatment variables on fiber quality of Colza stem
chemi-mechanical pulp [Volume 26, Issue 2, 2011, Pages 371-386]
G
Ghasemi, Esmaeil
The effect of paper sludge , content and polymer types on the physical properties of wood- plastic composites [Volume 26, Issue 3, 2011, Pages 486-494]
Ghasemi, Somayeh
The effect of consistency on the optical properties of hydrogen peroxide bleached CMP pulp [Volume 26, Issue 2, 2011, Pages 298-409]
Ghasemian, Ali
Investigation of the properties of alkline peroxide mechanical pulp(APMP) from Cotton Stalk [Volume 26, Issue 1, 2011, Pages 98-116]
Ghasemian, Ali
The effects of hot water pre-extraction and alkaline catalyzed on
soda-AQ pulping of kenaf whole stem [Volume 26, Issue 3, 2011, Pages 437-453]
Ghorbani kobandeh, Maryam
Investigation on the effect of acetylation and the resin type on the biological resistance of aspen tree layered particleboard [Volume 26, Issue 3, 2011, Pages 466-476]
Golbabaei, Fardad
Pulp and paper making features of Sequoia sempervirens wood [Volume 26, Issue 1, 2011, Pages 83-97]
Golbabaei, Fardad
The potential of utilization of alder wood fibers In medium density fiberboard production [Volume 26, Issue 1, 2011, Pages 26-38]
Golchinfar, Meisam
Comparative wood anatomy of Wych Elm, English Elm,
Caucasian Elm and Hackberry [Volume 26, Issue 3, 2011, Pages 564-578]
H
Hajihassani, Reza
Effect of steaming time on medium density fiberboard properties produced from beech wood fibers [Volume 26, Issue 4, 2012, Pages 667-681]
Hamzeh, Yahya
Chemical composition of the paper making solid wastes [Volume 26, Issue 2, 2011, Pages 281-290]
Hamzeh, Yahya
The effect of paper sludge , content and polymer types on the physical properties of wood- plastic composites [Volume 26, Issue 3, 2011, Pages 486-494]
Hatefnia, Hamid
Effect of steam treatment on chemical changes of wood components [Volume 26, Issue 4, 2012, Pages 682-698]
Hatefnia, Hamid
Evaluation of steam pretreatment of poplar wood particles on the mechanical and physical properties of particleboard [Volume 26, Issue 4, 2012, Pages 785-797]
Hosseini hashemi, sayed Khalil
The most important anatomical characteristics in paper’s components identification [Volume 26, Issue 3, 2011, Pages 545-563]
Hosseini hashemi, Sayed khalil
Influence of fungal decay on durability and hardness strength characteristics of bagasse/PP composite [Volume 26, Issue 1, 2011, Pages 173-192]
Hosseinkhani, Hossein
The effect of wood species on particleboard properties [Volume 26, Issue 1, 2011, Pages 58-71]
Hosseinpoor, Reza
The impact of chemical treatment variables on fiber quality of Colza stem
chemi-mechanical pulp [Volume 26, Issue 2, 2011, Pages 371-386]
Hossein poor, Yadolah
Evaluation the effect of kiln schedule on warp and surface checking in beech
(fagus orientalis Lipsky) at 5 cm thickness [Volume 26, Issue 2, 2011, Pages 352-370]
J
Jahan latibari, Ahmad
Simultaneous estimation of demand and supply functions & production and consumption projection of corrugated board in Iran [Volume 26, Issue 2, 2011, Pages 256-270]
Jahan latibari, Ahmad
Investigation on production of bleachable chemi-mechanical pulp from
wheat straw [Volume 26, Issue 4, 2012, Pages 634-646]
Jahan - Latibari, Ahmad
The Influence of Alkalinity in Oxygen Delignification of Soda/AQ Pulp From
Old Corrugated Container [Volume 26, Issue 2, 2011, Pages 232-242]
Jahan - Latibari, Ahmad
The impact of chemical treatment variables on fiber quality of Colza stem
chemi-mechanical pulp [Volume 26, Issue 2, 2011, Pages 371-386]
Jalili, Mohammad mehdi
Features of wood-plastic composites with the base of thermo set epoxy [Volume 26, Issue 2, 2011, Pages 314-325]
Jalili, Mohammad mehdi
Designing and manufacturing of polyester composites reinforced with natural and synthetic fibers as an alternative for the wood in music instruments [Volume 26, Issue 4, 2012, Pages 732-756]
Jalilvand, Mehran
Creep behavior of the composites made from creep behavior of the composites made from waste materials of OCC recycling mills [Volume 26, Issue 4, 2012, Pages 798-810]
K
Kargarfard, Abolfazl
Investigation on the properties of cement-bagasse fiber composite as a
structural material [Volume 26, Issue 2, 2011, Pages 291-299]
Kargarfard, Abolfazl
Effect of steaming time on medium density fiberboard properties produced from beech wood fibers [Volume 26, Issue 4, 2012, Pages 667-681]
Kargarfard, Abolfazl
The potential of utilization of alder wood fibers In medium density fiberboard production [Volume 26, Issue 1, 2011, Pages 26-38]
Karimi, Alinaghi
Investigation on the effect of acetylation and the resin type on the biological resistance of aspen tree layered particleboard [Volume 26, Issue 3, 2011, Pages 466-476]
Karimi, Alinaghi
The effect of drying intensity and moisture content on longitudinal permeability of poplar tension and normal wood (populus nigra ) [Volume 26, Issue 3, 2011, Pages 477-485]
Kazemi najafi, Saeid
Use of kraft lignin as compatibilizer in wood flour-polypropylene
Composites [Volume 26, Issue 3, 2011, Pages 454-465]
Kazemi najafi, Saeid
Effect of Beech bark Content on Physical and Mechanical Properties
of Bark Flour-Polypropylene Composites [Volume 26, Issue 4, 2012, Pages 811-823]
Khademeslami, Habib alah
Investigation of applying the old corrugated container (OCC)
and aspen chips in particleboard production [Volume 26, Issue 1, 2011, Pages 138-150]
Khademi eslam, Habib alah
Thermal properties and X-ray diffraction of wood plastic nanocomposite (effect of coupling agent and nanoclay content) [Volume 26, Issue 1, 2011, Pages 151-160]
Khademi eslam, Habib alah
Effect of Enzymatic Treatment on Mechanical Strength of Deinked Pulp of Old Newspaper [Volume 26, Issue 1, 2011, Pages 161-172]
Khakifiroz, Alireza
Investigation of newsprint pulp strength of prepared from rape straw using chemo mechanical pulping process [Volume 26, Issue 3, 2011, Pages 429-436]
L
Layeghi, Mohammad
Prediction mechanical properties of particleboard and analysis the interaction effect of slenderness ratio and resin content, using linear, quadratic and exponential equation [Volume 26, Issue 3, 2011, Pages 511-522]
M
Mahdavi, Saeed
The effect of wood species on particleboard properties [Volume 26, Issue 1, 2011, Pages 58-71]
Mahdavi, Saeed
Effect of shape and particle size of mechanical pulp fines on paper properties [Volume 26, Issue 4, 2012, Pages 605-621]
Mahdavi, Saeid
Effect of anthraquinone on NSSC pupling of P.deltoides [Volume 26, Issue 4, 2012, Pages 622-633]
Maili, Nader
Effect of Enzymatic Treatment on Mechanical Strength of Deinked Pulp of Old Newspaper [Volume 26, Issue 1, 2011, Pages 161-172]
Malkian, Hamid
Effects of plant dyes ( walnut shell , tea plant , henna ) on paper's stability in manuscript restoration [Volume 26, Issue 4, 2012, Pages 647-666]
Malmir cheghini, Khodadad
Effect of ink and paper characteristics on print quality in board-packaging industries based on print density index. [Volume 26, Issue 1, 2011, Pages 39-57]
Mirshokraei, Ahmad
Investigating the Effect of Structural Changes of Alkali Lignins Caused by Reduction and Methylation Reaction on the Optical Characteristics of Lignin-Containing Papers [Volume 26, Issue 1, 2011, Pages 10-25]
Mirzaei, Babak
Chemical composition of the paper making solid wastes [Volume 26, Issue 2, 2011, Pages 281-290]
Mirzaei, Babak
The effect of paper sludge , content and polymer types on the physical properties of wood- plastic composites [Volume 26, Issue 3, 2011, Pages 486-494]
Modirzarea, Mehdi
Influence of fungal decay on durability and hardness strength characteristics of bagasse/PP composite [Volume 26, Issue 1, 2011, Pages 173-192]
Moezipoor, Bita
Utilization of waste paper and old corrugated carton (OCC) as a filler of urea formaldehyde resin on plywood manufacturing [Volume 26, Issue 2, 2011, Pages 271-280]
Moezi poor, Bita
Utilization of date palm and kenaf fibers for reinforcement of
practical properties of plywood [Volume 26, Issue 3, 2011, Pages 495-510]
Mohammad ali bighi, Samira
Investigation on the effect of acetylation and the resin type on the biological resistance of aspen tree layered particleboard [Volume 26, Issue 3, 2011, Pages 466-476]
Mohammadi, Alireza
Effect of wheat straw surface treatment by using amino silane coupling agent on properties of amino plastic resin-bonded wheat straw particle boards [Volume 26, Issue 1, 2011, Pages 128-137]
Mohammadi, Alireza
Effect of static densification of treated paulownia wood on relationship between strength and density [Volume 26, Issue 3, 2011, Pages 592-604]
Mohammad kazemi, Farank
Investigating of the effect of using bagasse and isocyanate adhesive on the 3-layer particleboard manufacturing [Volume 26, Issue 2, 2011, Pages 300-313]
Mosavi, Sayed yahya
Designing and manufacturing of polyester composites reinforced with natural and synthetic fibers as an alternative for the wood in music instruments [Volume 26, Issue 4, 2012, Pages 732-756]
Mosavi, Sayed Yahya
Features of wood-plastic composites with the base of thermo set epoxy [Volume 26, Issue 2, 2011, Pages 314-325]
Nasiry, Hamed
Investigation on the properties of cement-bagasse fiber composite as a
structural material [Volume 26, Issue 2, 2011, Pages 291-299]
Nazarneghad, Noraldin
Thermal properties and X-ray diffraction of wood plastic nanocomposite (effect of coupling agent and nanoclay content) [Volume 26, Issue 1, 2011, Pages 151-160]
Nazarnezhad, Noraldin
Study of particleboard manufacture by nonconventional bonding [Volume 26, Issue 1, 2011, Pages 1-9]
Nazaryan, Morteza
Determination of proper college student chair dimension and comparison with the prevalent model [Volume 26, Issue 4, 2012, Pages 772-784]
Nazry, Amir mohsen
Effect of shape and particle size of mechanical pulp fines on paper properties [Volume 26, Issue 4, 2012, Pages 605-621]
Nicsresht sigharodi, Mohammad reza
The most important anatomical characteristics in paper’s components identification [Volume 26, Issue 3, 2011, Pages 545-563]
Nourbakhsh, Amir
Investigation of applying the old corrugated container (OCC)
and aspen chips in particleboard production [Volume 26, Issue 1, 2011, Pages 138-150]
Nourbakhsh, Amir
Influence of fungal decay on durability and hardness strength characteristics of bagasse/PP composite [Volume 26, Issue 1, 2011, Pages 173-192]
Nourbakhsh, Amir
The potential of utilization of alder wood fibers In medium density fiberboard production [Volume 26, Issue 1, 2011, Pages 26-38]
O
Oromihei, Abdol rasol
Effect of different polypropylene grades and coupling agent on the properties of Wood Plastic Composites [Volume 26, Issue 4, 2012, Pages 757-784]
P
Parhizkari, Mohammad mehdi
The effect of drying intensity and moisture content on longitudinal permeability of poplar tension and normal wood (populus nigra ) [Volume 26, Issue 3, 2011, Pages 477-485]
Pirayeshfar, Amir sohil
Designing and manufacturing of polyester composites reinforced with natural and synthetic fibers as an alternative for the wood in music instruments [Volume 26, Issue 4, 2012, Pages 732-756]
Pirayesh far, Amir sohil
Features of wood-plastic composites with the base of thermo set epoxy [Volume 26, Issue 2, 2011, Pages 314-325]
Pormosa, Shademan
Effect of ink and paper characteristics on print quality in board-packaging industries based on print density index. [Volume 26, Issue 1, 2011, Pages 39-57]
R
Rahimi, Sohrab
Comparison of the quality of poplar lumber in the upper, middle and lower rows of wood drying kiln [Volume 26, Issue 2, 2011, Pages 326-338]
Rashedi, Kambiz
Chemical composition of the paper making solid wastes [Volume 26, Issue 2, 2011, Pages 281-290]
Resalati, Hossein
Utilization of Organic Complex of Glanapone Stab Rather than Sodium Silicate in Peroxide Bleaching of Mixed Hardwood CMP Pulp [Volume 26, Issue 1, 2011, Pages 193-217]
Resalati, Hossein
Investigation on the physical and mechanical properties of waste newspaper deinked pulp by cellulase enzyme compared to conventional method [Volume 26, Issue 2, 2011, Pages 243-255]
Resalati, Hossein
Optical and physical properties of mixed hardwood CMP pulp and the birch wood [Volume 26, Issue 3, 2011, Pages 523-534]
Resalti, Hossein
Investigation of Substituting the organic complex of sulvy-x rather than sodium silicate in CMP pulp bleaching of Mazandaran wood and paper industries [Volume 26, Issue 3, 2011, Pages 411-428]
Resalti, Hossein
The effects of hot water pre-extraction and alkaline catalyzed on
soda-AQ pulping of kenaf whole stem [Volume 26, Issue 3, 2011, Pages 437-453]
Rezaei, Fatemeh
Effect of steaming time on medium density fiberboard properties produced from beech wood fibers [Volume 26, Issue 4, 2012, Pages 667-681]
Rohnia, Mehran
Designing and manufacturing of polyester composites reinforced with natural and synthetic fibers as an alternative for the wood in music instruments [Volume 26, Issue 4, 2012, Pages 732-756]
Roohnia, Mehran
Simultaneous estimation of demand and supply functions & production and consumption projection of corrugated board in Iran [Volume 26, Issue 2, 2011, Pages 256-270]
Roshnasan, Jalil
Biometrical properties of hornbeam fibers
from Astara [Volume 26, Issue 3, 2011, Pages 535-544]
Rostaei, Maryam
Effect of anthraquinone on NSSC pupling of P.deltoides [Volume 26, Issue 4, 2012, Pages 622-633]
S
Safdari, Vahid
Influence of fungal decay on durability and hardness strength characteristics of bagasse/PP composite [Volume 26, Issue 1, 2011, Pages 173-192]
Safdari, Vahid reza
The most important anatomical characteristics in paper’s components identification [Volume 26, Issue 3, 2011, Pages 545-563]
Safdari, Vahid reza
Comparative wood anatomy of Wych Elm, English Elm,
Caucasian Elm and Hackberry [Volume 26, Issue 3, 2011, Pages 564-578]
Samariha, Ahmad
Investigation of newsprint pulp strength of prepared from rape straw using chemo mechanical pulping process [Volume 26, Issue 3, 2011, Pages 429-436]
Sapideh dam, Sayed javad
The impact of chemical treatment variables on fiber quality of Colza stem
chemi-mechanical pulp [Volume 26, Issue 2, 2011, Pages 371-386]
Saraeian, Ahmad reza
Investigation on the Application of the Organic Complex " Sulvy-x " in Peroxide Bleaching of Hornbeam CMP Pulp [Volume 26, Issue 1, 2011, Pages 117-127]
Saraeian, Ahmad reza
Investigation on the physical and mechanical properties of waste newspaper deinked pulp by cellulase enzyme compared to conventional method [Volume 26, Issue 2, 2011, Pages 243-255]
Saraeyan, Ahmadreza
Biometrical properties of hornbeam fibers
from Astara [Volume 26, Issue 3, 2011, Pages 535-544]
Saraeyan, Ahmad reza
Investigation of the properties of alkline peroxide mechanical pulp(APMP) from Cotton Stalk [Volume 26, Issue 1, 2011, Pages 98-116]
Saraeyan, Ahmad reza
Investigating morphological and chemical characteristics of tobacco stalk [Volume 26, Issue 2, 2011, Pages 339-351]
Sarkhosh rahmani, Farshad
Study on production of fluting paper from wheat straw soda – AQ pulp and OCC pulp blends [Volume 26, Issue 2, 2011, Pages 387-397]
Sepidehdam, Sayed javad
The effect of wood species on particleboard properties [Volume 26, Issue 1, 2011, Pages 58-71]
Sepidehdam, Sayed javad
Effects of plant dyes ( walnut shell , tea plant , henna ) on paper's stability in manuscript restoration [Volume 26, Issue 4, 2012, Pages 647-666]
Sepideh dam, Mohammad javad
The most important anatomical characteristics in paper’s components identification [Volume 26, Issue 3, 2011, Pages 545-563]
Shahverdi, Mahdi
The susceptibility of poplar tension and normal wood (P. nigra) to collapse during drying [Volume 26, Issue 3, 2011, Pages 579-591]
Shakhes, Jalal
Investigating morphological and chemical characteristics of tobacco stalk [Volume 26, Issue 2, 2011, Pages 339-351]
Shob chary, Hossein
Investigation of the properties of alkline peroxide mechanical pulp(APMP) from Cotton Stalk [Volume 26, Issue 1, 2011, Pages 98-116]
Solimani, Ali
Investigation of Substituting the organic complex of sulvy-x rather than sodium silicate in CMP pulp bleaching of Mazandaran wood and paper industries [Volume 26, Issue 3, 2011, Pages 411-428]
Solimani, Ali
Optical and physical properties of mixed hardwood CMP pulp and the birch wood [Volume 26, Issue 3, 2011, Pages 523-534]
Solimani, Somayeh
Effects of plant dyes ( walnut shell , tea plant , henna ) on paper's stability in manuscript restoration [Volume 26, Issue 4, 2012, Pages 647-666]
T
Tabarsa, Taghi
Effect of wheat straw surface treatment by using amino silane coupling agent on properties of amino plastic resin-bonded wheat straw particle boards [Volume 26, Issue 1, 2011, Pages 128-137]
Tabarsa, Taghi
Effect of static densification of treated paulownia wood on relationship between strength and density [Volume 26, Issue 3, 2011, Pages 592-604]
Taghiyari, Hamid Reza
The effect of drying intensity and moisture content on longitudinal permeability of poplar tension and normal wood (populus nigra ) [Volume 26, Issue 3, 2011, Pages 477-485]
Taheri, Fatemeh
Effect of different polypropylene grades and coupling agent on the properties of Wood Plastic Composites [Volume 26, Issue 4, 2012, Pages 757-784]
Tajdini, Ajang
Simultaneous estimation of demand and supply functions & production and consumption projection of corrugated board in Iran [Volume 26, Issue 2, 2011, Pages 256-270]
Tajdini, Ajang
The impact of chemical treatment variables on fiber quality of Colza stem
chemi-mechanical pulp [Volume 26, Issue 2, 2011, Pages 371-386]
Tajvidi, Mehdi
Effect of different polypropylene grades and coupling agent on the properties of Wood Plastic Composites [Volume 26, Issue 4, 2012, Pages 757-784]
Talaei, Mohammad
Effect of Enzymatic Treatment on Mechanical Strength of Deinked Pulp of Old Newspaper [Volume 26, Issue 1, 2011, Pages 161-172]
Talaeipoor, Mohammad
Investigation of applying the old corrugated container (OCC)
and aspen chips in particleboard production [Volume 26, Issue 1, 2011, Pages 138-150]
Talaeipoor, Mohammad
Study on production of fluting paper from wheat straw soda – AQ pulp and OCC pulp blends [Volume 26, Issue 2, 2011, Pages 387-397]
Talaeipoor, Mohammad
Effect of shape and particle size of mechanical pulp fines on paper properties [Volume 26, Issue 4, 2012, Pages 605-621]
Talaeipoor, Mohammad
Effect of ink and paper characteristics on print quality in board-packaging industries based on print density index. [Volume 26, Issue 1, 2011, Pages 39-57]
Taremian, Asghar
Comparison of the quality of poplar lumber in the upper, middle and lower rows of wood drying kiln [Volume 26, Issue 2, 2011, Pages 326-338]
Taremian, Asghar
The susceptibility of poplar tension and normal wood (P. nigra) to collapse during drying [Volume 26, Issue 3, 2011, Pages 579-591]
Tasoji, Mohammad
Effect of static densification of treated paulownia wood on relationship between strength and density [Volume 26, Issue 3, 2011, Pages 592-604]
Tasooji, Mohammad
Effect of wheat straw surface treatment by using amino silane coupling agent on properties of amino plastic resin-bonded wheat straw particle boards [Volume 26, Issue 1, 2011, Pages 128-137]
Tavakkoli, Amir
Simultaneous estimation of demand and supply functions & production and consumption projection of corrugated board in Iran [Volume 26, Issue 2, 2011, Pages 256-270]
Tazkrrezaei, Vahid
Evaluation the effect of kiln schedule on warp and surface checking in beech
(fagus orientalis Lipsky) at 5 cm thickness [Volume 26, Issue 2, 2011, Pages 352-370]
U
Unesi kord khalili, Hamd
Creep behavior of the composites made from creep behavior of the composites made from waste materials of OCC recycling mills [Volume 26, Issue 4, 2012, Pages 798-810]
Unsi kord khelili, Hamed
Use of kraft lignin as compatibilizer in wood flour-polypropylene
Composites [Volume 26, Issue 3, 2011, Pages 454-465]
Usefi, Hossein
Effect of nanoclay on the properties of medium density
fiberboard (MDF) [Volume 26, Issue 4, 2012, Pages 699-707]
V
Varshoei, Ali
Investigation on the properties of cement-bagasse fiber composite as a
structural material [Volume 26, Issue 2, 2011, Pages 291-299]
Z
Zyaei, Hassan
Thermal properties and X-ray diffraction of wood plastic nanocomposite (effect of coupling agent and nanoclay content) [Volume 26, Issue 1, 2011, Pages 151-160]
Zynali, Farhad
Investigating morphological and chemical characteristics of tobacco stalk [Volume 26, Issue 2, 2011, Pages 339-351]
